Dolphin Nautilus CC Pro + Ultra-Fine Filters Bundle

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programmed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

Cleaning the filters is simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters after each use.