Standard Aboveground Winter Cover

Protect your investment with our Aqua-Guard Winter pool covers. Made with polyethylene sheeting and laminated on both sides to help resist pin-holing and damage due to high winds. Our Standard Winters covers are thicker than Basic Covers providing more fabric weave per square inch to resist tearing.

Standard Winter Cover

• 9x9 Weave, 3.2 oz material
• Laminated polyethylene sheeting
• UV Protected
• Temperature resistance -40/+80C
• Dark Blue/Black
• Double needle high strength polyester stitching

Our Aboveground pool covers include a coated cover cable and winch tool for securing the cable around the outside pool perimeter.

A 4’ overlap is provided with all aboveground winter covers.  For example, a 24’ round winter cover has a cover size of 28’ round providing an additional 2 feet all the way around allowing the cover to rest on the water surface at winterizing level.

All Standard Aboveground Winter Covers come with a Full 2-year warranty against seam separations only.

Surface abrasion or pin holes due to high winds, punctures, tears or critter damage, is not covered under the Aqua-Guard warranty. To prevent wind damage, consider the use of wall bags (available to add on this page) to provide gentle “in pool” cover weight to your cover.

Water loss over the winter due to liner leaks will add stress to the winter cover as the water level drops. Torn grommets or hems caused by water loss is not covered under the Aqua-Guard warranty. Perform a water loss test prior to closing. Place a piece of painter’s tape on the skimmer faceplate at the current water level with pool water at seasonal temperature. Wait 24 hours. After 24 hours, if water loss is greater than ¼” your pool liner could be compromised. Contact wecare@aquaguardpoolproducts.ca or your local pool professional for additional advice.