Standard Inground Winter Cover

Protect your investment with our Aqua-Guard Winter pool covers. Made with polyethylene sheeting and laminated on both sides to help resist pin-holing and damage due to high winds. Our Standard Winters covers are thicker than Basic Covers providing more fabric weave per square inch to resist tearing.

Standard Winter Cover

• 9x9 Weave, 3.2 oz material
• Laminated polyethylene sheeting
• UV Protected
• Temperature resistance -40/+80C
• Dark Blue/Black
• Double needle high strength polyester stitching

Our Inground rectangular pool covers include waterbag loops installed around the outside pool perimeter to help keep waterbags in place.

A 6’ overlap is provided with all inground winter covers.  For example, a 16’ x 32’ rectangle winter cover has a cover size of 22’ x 38’ providing an additional 3 feet all the way around allowing the cover to rest on the deck and on the water surface at winterizing level.

All Standard Inground Winter Covers come with a Full 2 year warranty against seam separations only.

Surface abrasion or pin holes due to high winds, punctures, tears or critter damage, is not covered under the Aqua-Guard warranty.

Water loss over the winter due to liner leaks will add stress to the winter cover as the water level drops. Torn grommets or hems caused by water loss is not covered under the Aqua-Guard warranty. Perform a water loss test prior to closing. Place a piece of painter’s tape on the skimmer faceplate at the current water level with pool water at seasonal temperature. Wait 24 hours. After 24 hours, if water loss is greater than ¼” your pool liner could be compromised. Contact wecare@aquaguardpoolproducts.ca or your local pool professional for additional advice.